Custom Wallpaper: How to Order the Perfect Size for Your Wall

Custom Wallpaper: How to Order the Perfect Size for Your Wall

One of the most common reasons people hesitate to order a custom wall mural is uncertainty about sizing. What measurements do you need? How do you account for outlets, windows, and baseboards? What if the wall is not perfectly square? These are valid questions, and the good news is that ordering custom wallpaper is more straightforward than most people expect. This guide walks you through the process from measuring your wall to submitting your final order — so your custom mural fits exactly as it should.

Why Custom Sizing Matters

Standard wallpaper rolls are designed to repeat and tile across a surface. Custom wallpaper is different: it is printed as a single seamless image sized to your exact wall dimensions. This means no repeated tile edges to match, no pattern breaks at inconvenient places, and no trimming waste.

  • A custom size wall mural covers your wall as one cohesive image — no seams or breaks in the design
  • Every inch of the print is purposeful — the composition is designed around your wall's specific proportions
  • Eliminates the guesswork of buying by the roll and calculating repeat coverage
  • Works for any wall shape or non-standard dimension

Step 1: Measure Your Wall Accurately

Start with a steel tape measure — fabric or plastic tapes can stretch and give inaccurate readings. Measure both the width and the height of the wall at multiple points, because walls in older homes are rarely perfectly uniform.

  • Measure width at the top, middle, and bottom of the wall — record the largest measurement
  • Measure height on the left side, center, and right side — record the largest measurement
  • Round up, not down — it is better to trim a small amount than to end up short
  • Add 2–3 inches to both width and height as bleed margin for cutting during installation
  • Measure in inches for precision — convert to feet only for the order summary

Step 2: Account for Obstacles

Walls with windows, doors, electrical outlets, or built-in fixtures require some additional planning. The key rule is simple: measure the full wall as if the obstacles were not there. The mural will be printed for the full dimensions, and you will trim around fixtures during installation.

  • Do not subtract window or door dimensions from your wall measurement — order for the full wall
  • Outlets and switch plates are covered during installation and cut out after — no special measurement needed
  • For walls with a fireplace or built-in shelving that protrudes from the surface, measure only the flat wall area and note the obstacle placement when ordering
  • For accent walls where the mural covers only part of the wall, measure just the intended coverage area plus bleed margin

Step 3: Choose Your Material

Not all peel and stick wallpaper materials are the same. The right choice depends on your wall surface and intended use. Aguadilla Printing works with professional-grade media engineered for interior wall applications:

  • GF 285 RoughMark: Adhesive vinyl suitable for most interior wall textures — the most versatile option for standard drywall and painted surfaces
  • GF 275 SubMark: Smooth-surface adhesive vinyl for flat, well-primed walls — produces the sharpest print clarity
  • GF 229HTR WallMark Canvas: Textured canvas finish for ultra-smooth walls — adds tactile depth and a premium look, ideal for accent walls in living areas and hospitality spaces

If your wall has a rough or heavily textured surface, RoughMark is the recommended choice. For smooth, well-prepped drywall or plaster, SubMark or Canvas will produce the best visual result.

Step 4: Prepare Your Wall Before Installation

Even the best custom wallpaper will not adhere properly to a dirty, damp, or freshly painted wall. Proper wall prep is the single most important factor in a clean, bubble-free installation.

  • Clean the wall with a dry microfiber cloth to remove dust — use a damp cloth for grease or fingerprints, then allow to dry completely
  • Fill any holes or cracks with spackling compound and sand smooth before applying
  • If the wall was recently painted, wait at least 30 days for full cure before applying adhesive vinyl
  • Do not apply to textured surfaces if using SubMark — those are designed for smooth walls only
  • A flat or eggshell paint finish provides better adhesion than high-gloss paint

Step 5: Submit Your Order with Confidence

Once you have your measurements and material choice ready, ordering is straightforward. Provide your width and height in inches (including bleed margin), specify your chosen material, and upload your design file or select from available designs. For custom designs, files should be submitted at the highest available resolution to ensure sharp print output at full wall scale.

  • Submit dimensions in width x height format (e.g., 120 inches wide x 96 inches tall)
  • Design files should be at least 150 DPI at full print size — 300 DPI preferred for maximum sharpness
  • Confirm your design accounts for the full bleed dimensions you submitted
  • Installation instructions are included with every order

Order a $10 Sample Before Your Full Print

Before committing to a full custom wall mural, order a $10 printed sample from Aguadilla Printing to verify material quality, adhesion performance, and color accuracy on your actual wall. It is the most reliable way to confirm you are getting exactly what you expect before the full order ships.

Visit aguadillaprinting.com to order your sample or place a custom wallpaper order sized exactly to your wall.